​

Weighing system

​

We produce and design weighing system for batteries.

​

The system can be one standalone unit for control weighing of batteries in a finishing line or a system incorporated in a filling line/formation line.

​

In the latter case the system includes two weighing units: one before filling and one after filling. The unit after the filling machine is equipped with a reject table.

The principle is that a battery is weighed before and after filling, to check whether the correct acid volume/weight has been obtained.

The weight of filled acid is calculated and checked against the preset values recorded in the PLC of the filling machine. If the measured value is not correct the battery will be rejected.

​

It is possible to incorporate a third weighing unit with a reject table that is placed after formation to control the loss of acid during formation. The value from this unit is then compared with the value of the filled battery. If this is not correct the battery is rejected. To be able to keep track on the battery and the weighing values a database and product identification system is necessary.

​

​

Weighing uit with reject table	Acid filler SF4-8 with three weighing units: before and after filling and after formation ​

​

​

Features:

​

• Single weighing unit

• System including several weighing units for filling and formation control

• Reject table

• Acid Proof design

• Weighing capacity: 100kg (other possibel)

• Weighing accuracy: ​±5g (other possible)

• Possible to integrate with database and product identification

​

Please contact us for more information!

​